So it’s not completely done yet, but the room that we have started, and has drawn inspo from the board we put together in this post is getting there… We still need to paint a bunch of the furniture, and you know, make the bed on a regular basis (because #teenager) but here’s the progress so far:
So we started out with some Ikea LACK shelves and a dream… Which was to put this marble paper on the shelves and make em look like marble. Easy right? WRONG. NOT EASY.
Air bubbles are the biggest bastard pain in the a$$. Smugly we were all, oh ya, 3 rolls? Please we’ll only need 1! Ya, no. Not so much. Luckily we figure it out in 3. The key is pushing the air out at the same rate you are attaching the paper to the surface, and to not try to line up the corners of the paper with the corners of the shelf, even though technically there are a lot of 90 degree angles you can be taking advantage of cause guess what? You won’t get it straight. Not even on the 10th try. So just don’t. Give yourself some room off of all 4 sides for it not to be straight and focus on getting the bubbles out.
Start pressing the air out on one side while applying the sticky side to the surface of the shelf, and use a hardcover book or equivalent (not an edge type thing you’d use for real wallpaper, it makes creases and pushes down too specifically on the paper, not spreading the adhesive portion around enough to get an even cover.#trust) to push the air out. Stick and push along until you get to the end of the largest surface and then stick to the side. Cut off the extra bits that you will inevitably have with a very accurate pair of scissors or exacto knife. To cover the long sides in the front, you will need to cut into either side of the paper before you adhere to the shelf so you don’t have an extra external fold you’ll have to cut off later. This is basically like wrapping a very large book really nicely with sticky paper.
Two things we discovered and totally didn’t anticipate.
1. You’ll need to cover the full top and sides of any shelf that is at eye level or below. The underside doesn’t matter that much if you run out of paper.
2. Any shelf surface you are covering that is eye level or above? Put the patterned paper on the underside of the shelf and the sides instead. Cause physics.
As this is all illusion based decor anyway, jus think about what parts of the shelves you are actually going to see, and don’t worry about those you can’t. Especially if you run out of paper cause this project ends up NOT BEING AS EASY AS YOU THOUGHT. Or so we’ve heard….
The other main part of the room makeover was the feature wall, which was NOT as difficult as the shelves, but was time consuming as the surface area was significantly larger. All in the whole project took an afternoon between 2 people, so not an unreasonable task to accomplish on a weekend.
For a complete overview of how we put the wall together, you should check out this video, it’s got the whole process into less than 5 minutes!
All you need is painters tape, 3 colours and a ruthless eye for straight lines! The thing to remember is that just because tape is straight, that doesn’t mean your lines will be. The best way to try to keep your lines straight is by letting the tape dictate the line by flattening it out as you go instead of trying to stretch it according to where you think it should be going. That’s where the curves comes from that you’ll need to go back and fix.
Next stop on the journey: painting the furniture, that dark mid 2000’s wood bed frame included!